Model Number

Shengfa Stainess Steel Mesh

Stainless Steel Wire Mesh-Twill Weave|Twill Weave Stainless Steel Mesh|Stainless Steel Woven Wire|Stainless Steel Wire Cloth|Stainless Steel Bolting Cloth|Woven Wire Mesh|Woven Wire Cloth|Stainless Wire Mesh Factory|

is made by each weft wire passing alternately over two, and then under two successive warp wires and each warp wire passing alternately over two and under two successive weft wires. It is possible to be used to allow a heavier than standard wire diameter.

Stainless Steel Square Wire Mesh produced by ShengFa is classified into two types according to weaving patterns:

Stainless steel square wire mesh plain weave
Stainless steel square wire mesh twill weave

Stainless Steel Wire Mesh Plain weave is the most commonly used weave. Each warp wire crosses alternately above and below each weft wire. Warp and weft wires generally have the same diameter

Stainless Steel Square Wire Mesh Varieties according to materials:
Stainless steel square wire mesh type 304
Stainless steel square wire mesh type 304L
Stainless steel square wire mesh type 316
Stainless steel square wire mesh type 316L

Standard roll width of stainless steel square wire mesh: 1m or 48"
Standard roll length of stainless steel square wire mesh: 30m or 100?

Stainless Steel Square Wire Mesh Sizes:

Specification List of Stainless Steel Wire Mesh

Mesh/Inch	Wire Dia	Aperture
7x7	1.00	2.63
10x10	0.60	1.94
18x18	0.35	1.06
20x20	0.40	0.87
30x30	0.30	0.55
40x40	0.23	0.40
50x50	0.20	0.31
60x60	0.15	0.27
70x70	0.12	0.24
80x80	0.13	0.19
90x90	0.12	0.16
100x100	0.10	0.15
150x150	0.063	0.11
180x180	0.053	0.09
200x200	0.053	0.07
250x250	0.040	0.063
300x300	0.040	0.044
325x325	0.035	0.043
400x400	0.030	0.033
450x450	0.028	0.028
500x500	0.025	0.026
635x635	0.018	0.022

Roll width: 2'----8'